PC hardware CPU Cooler NINJA3 Ninja San Revision. B [SCNJ-3100]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Size Original side flow CPU cooler "Ninja3" for LGA2011
M. A. P. S (Multiple Airflow Pass-through Structure)
Uses a multi-air flow transmission structure.
Uses a fin design with a block structure that takes full advantage of the air flow effect of the fan, cultivated in the "Mutenni" cooler.
This model has a 4-block structure to match the traditional Ninja-cooler fin shape.
F. M.S. B. 4 (Flip Mount Super Back-plate 4)
Flip mount super back-plate 4
Uses an original back plate that attempts to make the most
of the new generation socket while maintaining high compatibility with each socket.
The cooler body can be strongly attached to the motherboard.
* Please note that the AMD socket 754/939/940 that was supported by "Ninja3" is not
supported.
The top screw
fixed system that does not use this back plate is used for the LGA2011.
Original small shaft & large blade design 12 cm fan "Kaze JYUNI" with variable PWM model.
What is variable PWM?
The included fan controller knob allows the frequency band of the fan rotation
number to be changed by PWM.
The range can be set from the maximum range 740 to 1900 rpm to the minimum range 470 to 1340 rpm. This allows the Character of the PWM fan to be changed to the user's preference (cooling emphasized type, noise emphasized type, balance type, etc.).
* The minimum and maximum speeds cannot be individually set.
Environmentally friendly products that comply with the RoHS directive.