Radio control 1 / 10MTC3 aluminium chassis kit [A2006]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ The MTC3 has evolved significantly from the highly successful MTC2 and MTC2R platforms.
The prototype was first raced at the 2024 World Championships, and the two MTC3s that participated in this event advanced to the A Final, with Ronald Volker finishing in fourth place and Jacob Cruz finishing in tenth place.
Below is a list of features and details of the 1/10 electric touring car MTC3.

● 1.5 mm aluminum chassis (A7075) :
・ The most effective effect of the 1.5 mm aluminum chassis is to improve stability by lowering the center of gravity.
・ Standard type screws can be used.
・ The rear overhang is designed to be very short to reduce contact with the road surface.
● Adjustable layshaft height :
・ The spur gear is always available at the lowest position.
・ The small spur gear and pinion gear can be used to reduce the moment of inertia of the motor and ESC, improving maneuverability.
● Sloped upper deck :
・ By lowering the connection position with the motor mount, the influence of sudden torque fluctuations from the motor is reduced.
● Shock tower :
・ Attached directly to the bulkhead.
motor
pinion gear
spur gear
ESC
car battery
charger
body (190 mm)
paint for body painting
tire & wheel & inner foam
[product details]
scale : 1/10
first bonus : B0561 lower arm insert tool MTC3
* Servo horn and weight are not included in the kit. It is necessary to purchase separately.
* The specifications of the kit are subject to change without prior notice due to product improvement. The picture used is a prototype and may differ from the kit. upper control arm upper control arm