1/35 German driving tank E-75 "Jacttiger II" 66 caliber 12.8cm/55 caliber 12.8 cm tank gun loaded 2-in-1 "Fist of War" [47072]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ 2-in-1 kit that can be made by choosing bore size 66 or bore size 55
It is an assembly kit that is modeled on 1/35 of the vehicles that might have been realized by German combat vehicles if the end of World War II had been delayed a little.
Regarding actual vehicles
The E-75 was designed as a heavy tank among the E-plan, which was designed to increase the productivity by standardizing various components in the development of each tank, which had been extremely complicated until then, and to standardize tanks by weight.
In October 1943, the mass production system of the initial design type was established, and it was put into the front line by rushing.
During the E-plan, the E-50 and E-75, which had been recovered from failure or damage on the battlefield, were remodeled into the Jactiger II, a destroyer tank with a fixed fighting chamber attached to the body of the E-50 and E-75, which were recovered by failure or damage on the battlefield.
The battle chamber with a front armor of 250 mm was equipped with 12.8 cm guns of bore size 66 or bore size 55. There were no guns that could penetrate the front armor of the Allied land-based weapons at that time.
Regarding the model
The model is modeled on 1/35 scale of the E-75 Jacttiger II, a destroyer tank that would have been developed and operated by the German army two years after the end of World War II.
In particular, the gun shape is based on the historical evidence of the rocket model. Of course, the gun body can move up and down even after completion.
The unique layout of the roller wheel that reproduces details realistically is not to be missed.
In addition, the crawler parts are partially integrated with the split adhesive type. The body shape and the design of the new turret are also reproduced realistically.
In addition, the crawler parts are partially integrated with the split adhesive type. The body shape and the design of the fixed fighting chamber are reproduced realistically.
In addition, the crawler parts are partially integrated with the split adhesive type. The total width is approximately 280 mm. The total width is approximately 110 mm.
In addition, the crawler parts are partially integrated with the split adhesive type. The body shape and the design of the fixed fighting chamber are reproduced realistically.
In addition, the crawler parts are partially integrated with the split adhesive type. The body shape and the design of the fixed fighting chamber are reproduced realistically.
In addition, the crawler parts are partially integrated with the split adhesive type. The body shape and the design of the fixed fighting chamber are reproduced realistically.
The crawler parts are 12.8 12.8 280 110 12.8