Plastic model Diorama Accessories Acrylic Brick Hexagon Type [GSWD-12567]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ It is an acrylic mold that you can make real bricks and paving stones equivalent to 1/35, 1/32, and 1/48.
You can reproduce various surface textures and patterns that reproduce real bricks, making it possible to make high-quality diorama accessories.
The material to be filled in the mold is a synthetic resin paper clay that hardens by air drying such as modeling clay DAS.
Usage :
1. Cleanly remove dirt and dust from the mold.
2. Attach cooking paper, wet kitchen paper, masking tape, [GSWD-10354] Paint Equipment S (A6) size Mylar stencil sheet to one side of the mold.
3. Place the mold on a flat surface with the side with the sheet on.
5. Flatten the surface. Press down on the rounded clay with your fingers to fill the mold. Remove excess clay on the surface with the attached plastic spatula.
6. Dry the clay until it hardens.
7. Once the clay has completely hardened, peel the sheet off the mold slowly and carefully.
8. Remove the bricks. Lightly poke the bricks with the round tip of the brush handle and push them out of the mold.
9. Smooth out the sharp edges of the bricks. Place the bricks on the palm of your hand, grasp them with both hands, and shake them lightly.
10. Use bricks. Can be used for road paving and wall decoration. Use instant adhesive or an acrylic sealer such as [GSWD-4149] medium / decoupage mat (matte) for adhesion.
Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD - 4.5] medium / decoupage mat (matte) for adhesion.
Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD - 6.3] medium / decoupage mat (matte) for adhesion.
Scale : 1/35 (1/48-1/32)
Scale : 1/35 (1/48-1/32)
Scale : 1/35 (1/48-1/32)
Scale : 1/35 (1/48-1 /