Diorama Accessories Acrylic Brick Tri-Hex Type [GSWD-12565]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ It is an acrylic mold that you can make real bricks and paving stones equivalent to 1/35, 1/32 and 1/48.
You can reproduce various surface textures and patterns that reproduce real bricks and make high-quality diorama accessories.
The material to be filled in the mold is a synthetic resin paper clay that hardens by air drying such as Modeling Clay DAS.
Usage :
1. Cleanly remove dirt and dust from the mold.
2. Attach cooking paper, wet kitchen paper, masking tape, [GSWD 10354] Paint Equipment S (A6) size Mylar stencil sheet to one side of the mold.
3. Place the mold on a flat surface with the side to which the sheet has been attached.
5. Flatten the surface. Press down on the rounded clay with your fingers to fill the mold. Remove excess clay on the surface with the provided plastic spatula.
6. Dry until the clay hardens.
7. Once the clay has completely hardened, peel the sheet off the mold slowly and carefully.
8. Take out the brick. Lightly poke the brick with the round tip of the brush handle and push it out of the mold.
9. Smooth out the sharp edges of the brick. Place the brick on the palm of your hand and lightly shake it with both hands.
Scale : 1/35 (1/48-1/32)
Brick Size : Approx. 10.9 x 11.0 mm
Brick Thickness : Up to 3 mm
Mold Size : Approx. 6 x 11 cm
21 pieces with 2 sheets of plastic spatula
Use : 1. Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD 4149] Medium / Decoupage Mat (Matte) for adhesion.
Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD 2008] Medium / Decoupage Mat (Matte) for adhesion.
Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD 2008] Medium / Decou