Plastic model Etching Set Compatible Kit for 1/35 KV-1 : Tamiya MM35372 [P35-160]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ Tamiya New Product KV-1 Etching Part has been developed.
The mesh attached to the intake port on the engine part is reproduced.
The plate for preventing the mesh from being stepped out is attached to the inside of the mesh.
The opening / closing handle attached to the inside of the hatch of the gun tower driver is reproduced.
The support of the fender is also added with the lock mechanism of the engine part hatch which is different in shape from this opening / closing handle.
The handle attached to the toolbox can be reproduced with a thin etching part.
The handle attached to the toolbox is a simple part and a movable handle.
The wind straightening plate which is a large part and difficult to bend is prepared with 2 types of pressed ones.
According to the photos of the battlefield at that time, this wind straightening plate was made of a large part and was very deformed.
Considering the subsequent deformation, I made it into a copper plate.
In addition, I added a DT machine gun (a set of 3 gun heads and 2 gas tubes) and 2 pistol ports in the car.
Use the supplied fine wire to reproduce the state in which the pistol port hangs from the outside of the car.
[Product Details]
Scale : 1/35