Plastic model 1/350 United States Navy nuclear submarine Florida SSGN-728 [DR1056]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■
[Actual ship]
The third Ohio-class nuclear submarine developed and deployed by the United States is in Florida.
The SSBN ballistic missile submarine was commissioned in 1983. It was renovated in 2003. It was newly converted to the SSGN cruise missile submarine, and was recommissioned in 2006.
The total length is approximately 170m. It is equipped with 154 Tomahawk cruise missiles and equipped with four 21-inch torpedo launchers.
In addition, the rear part of the bridge is equipped with special forces and dry deck shelters for SEALS.
In 2011, it participated in Operation Odyssey Dawn in Libya, and continues to be active even now.
In addition, the rear part of the bridge is equipped with special forces and dry deck shelters for SEALS.
It is a 1/350 scale reproduction of the U.S. nuclear cruise missile submarine Florida, which is currently commissioned.
It is a large model with a total length of nearly 50 cm. It is equipped with a full hull with smooth shapes.
The panel lines on the hull surface are accurately reproduced, adding realistic details to the monotonous hull.
The missile launch tube part in the latter half of the hull is a three dimensional reproduction of the missile launch tube by using the bulge part in the upper part of the hull as a separate part.
The launch tube hatch can be assembled by choosing to open and close. In addition, the bridge can be assembled with two sets of dry deck shelters attached to the rear part of the bridge.
The torpedo launch tube part at the bow is an open-and-close type, and the torpedo is modeled. In addition, the upper part is a set with a periscope and other parts. In addition, the bridge can be assembled with two sets of dry deck shelters attached to the rear part of the bridge.
The torpedo launch tube part at the bow is an open-and-close type, and the torpedo is modeled. In addition, the bridge can be assembled with two sets of dry deck shelters attached to the rear part of the bridge.
The torpedo launch tube part at the bow is an open-and-close type, and the torpedo is modeled. In addition, the bridge can be assembled with two sets of a nameplate display base that is convenient for exhibition after completion.
[Main features]
The large size is a close-and-close type, and the torpedo is modeled. In addition, the bridge can be assembled with two sets of a nameplate display base that is convenient for exhibition after completion.
[Product details]
Scale : 1/350
* The pre-ordered items are reproduced.